Online Encyclopedia Search Tool

Your Online Encyclopedia

 

Online Encylopedia and Dictionary Research Site

Online Encyclopedia Free Search Online Encyclopedia Search    Online Encyclopedia Browse    welcome to our free dictionary for your research of every kind

Online Encyclopedia



Timpani

(Redirected from Timpanist)

Timpani, or kettledrums, are percussion musical instruments. A type of drum, they consist of a skin, called a head, stretched over a large hemispherical bowl generally made of copper. Unlike most drums, they have a definite pitch when struck.

Timpani is an Italian plural, the singular of which is timpano. This is rarely used in English speech, however, as a timpano is typically referred to as simply a drum. An alternate spelling, tympani, is often encountered in English texts. It is derived from the Latin word tympanum, from which the Italian word descends.

A musician who plays the timpani is known as a timpanist.

Contents

The instrument

The basic timpano

The basic timpano consists of a hemispherical bowl with a drumhead stretched across the opening. The drumhead is connected to a hoop, which is then attached to the bowl via a number of tuning screws called taps placed regularly along the circumference. The head's tension can be adjusted by loosening or tightening the screws. Most timpani have six to eight such screws.

Timpani come in a variety of sizes from around 84 centimeters (33 inches) in diameter down to piccolo timpani of 30 centimeters (12 inches) or less. A 33-inch drum can produce the C below the bass clef, and speciality piccolo timpani can play up into the treble clef. In Darius Milhaud's ballet La création du monde, the timpanist must play the F sharp at the bottom of the treble clef!

Each individual drum typically has a range of a perfect fifth.

Machine timpani

Changing the pitch of a timpano by turning each screw individually is a laborious process. In the late 19th century, mechanical systems to change the tension of the entire head at once were developed. Timpani equipped with such a system are called machine timpani.

Pedal timpani

By far the most common type of timpani used today are pedal timpani, which allow the tension of the head to be adjusted using a pedal mechanism. Typically, the pedal is connected to the tuning screws via a spider-like system of metal rods.

There are three types of pedal mechanisms in common use today:

  • The ratchet-clutch (often called Dresden or Ringer) system uses a ratchet and clutch to hold the pedal in place. The timpanist must first disengage the clutch before using the pedal to tune the drum. When the desired pitch is achieved, he must reengage the clutch. The drums most professional timpanists use have Dresden pedals.
  • In the balanced action system, a spring is used to balance the tension on the timpani head so that the pedal will stay in position and the head will stay at pitch. The balanced action system is sometimes called a floating pedal since there is no clutch holding the pedal in place. Timpani used by school bands and orchestras typically have balanced action pedals. Many professionals also use timpani with balanced action pedals for gigs and outdoor performances because they tend to be more durable.
  • The friction clutch (sometimes called Berlin) system consists of a clutch attached to the pedal that moves along a post. When the player presses his toe forward, he frees the clutch from the post and the pedal moves freely. This system is much less common than the ratchet-clutch and balanced action systems.

Chain timpani

On chain timpani, the tuning screws are connected by a chain much like the one found on a bicycle. All the screws can then be tightened or loosened by one handle. Though far less common than pedal timpani, chain drums still have practical uses. Occasionally, a player is forced to place a drum behind other items so that he cannot reach it with his foot. Professional players may also use exceptionally large or small chain drums for special low or high notes.

Other tuning mechanisms

A rare tuning mechanism allows the pitch of the head to be changed by rotating the drum itself. A similar system is used on rototoms.

Timpani heads

Like most drumheads, timpani heads can be found made from two materials: animal skin (typically calfskin) and plastic. Plastic heads are durable, weather resistant, and relatively inexpensive. Thus, they are more commonly used than calfskin heads. However, many professional players prefer natural skin heads because they feel that skin heads produce a warmer, better quality timbre.

Timpani sticks

Timpani are typically struck with a special type of drumstick fittingly called a timpani stick, or timpani mallet. Timpani sticks are used in pairs. They have two components: a shaft and a head. The shaft is typically made from wood – usually hickory, cherry, birch, or maple – or bamboo, but may also be made from aluminum or graphite. The head of the stick can be constructed from a number of different materials, though felt wrapped around a wood core is the most common. Other core materials include felt and cork, and other wrap materials include leather. Sticks can also have exposed wood heads. These are used as a special effect and in authentic performences of Baroque music.

Although it is not commonly written in the music, timpanists will change sticks – often many times within the same piece – to suit the nature of the music. Thus, most own a great number of timpani sticks. The weight of the stick, the size of the head, the materials used for the shaft, core, and wrap, and the method used to wrap the head all contribute to the timbre the stick produces.

Timpani in the modern orchestra

A set of timpani

A standard set of timpani consists of four drums: roughly 80 cm (32 in), 75 cm (29 in), 66 cm (26 in), and 61 cm (23 in) in diameter. The range of this set is roughly the D below the bass clef to the top-line bass clef A. A great majority of the orchestral repertoire can be played using these four drums. However, Igor Stravinsky writes for the B below middle C in The Rite of Spring, and Leonard Bernstein requires the timpanist to execute both a top-line bass clef A flat and the B flat above it on the same drum in the overture to the operetta Candide. Adding a 51 cm (20 in) piccolo timpano to the standard set of four extends the range to middle C. Beyond this extended set of five, any added drums are nonstandard. Many professional orchestras and timpanists own multiple sets of timpani consisting of both pedal and chain drums allowing them to execute music that cannot be performed correctly using a standard set of four of five drums.

It should be noted that many schools and less fortunate ensembles only have a set of three timpani. This was the standard set until the second half of the 20th century. It consists of 75 cm (29 in), 66 cm (26 in), and 61 cm (23 in) drums. Its range extends down only to the F below bass clef.

Timpanists

Throughout their education, timpanists are trained as percussionists, and they learn all instruments of the percussion family along with timpani. However, when the timpanist is appointed to a position in a professional orchestra, he is not required to play any other percussion instruments. In his book Anatomy of the Orchestra (ISBN 0520050622), Norman Del Mar writes that the timpanist is "king of his own province", and that "a good timpanist really does set the standard of the whole orchestra."

Most pieces of music call for one timpanist to play a standard set of four (sometimes five) timpani. However, occasionally composers seeking a thicker texture ask for multiple players to perform on one or many sets of timpani. Gustav Mahler writes for two timpanists in symphonies 1, 2, 3, 6, 8, and 9.

Timpani concertos

Although it is not common, there have been concertos written for timpani. The 18th century composer Johann Fischer wrote a symphony for eight timpani and orchestra, which requires the solo timpanist to play eight drums simultaneously. In the year 2000, noted American composer Philip Glass wrote his Concerto Fantasy for two timpanists and orchestra, which has its two soloists playing a total of nine or more timpani.

Performance techniques

Striking the drum

For general playing, a timpanist will beat the head approximately 4 inches in from the edge. Beating at this spot produces the round, resonant sound commonly associated with timpani.

A timpani roll is executed simply by rapidly striking the drum, alternating between left and right sticks.

The tone quality of the drum can be altered without switching sticks or fiddling with the tuning of the drum. For example, by playing closer to the edge of the head, the sound becomes thinner. A more staccato sound can be produced by beating the drum with the heads of the sticks as close together as possible. When playing rolls, the sticks are placed farther apart to cause as much of the head as possible to vibrate. There are many more variations in technique a timpanist uses during the course of playing to produce subtle timbral differences.

Occasionally, composers will ask the timpanist to strike the drum at specific spots. Béla Bartók writes a passage "to be played at the edge of the head" in his Violin Concerto.

Tuning

Clearing timpani heads

To produce the best sound possible, the timpanist must clear the head by adjusting the pitch at all of the screws. This is done so every spot on the head is tuned to exactly the same pitch. When the head is clear, the timpano will produce a beautiful, in-tune sound. If the head is not clear, the pitch of the drum will rise or fall after the initial impact, and the drum will produce different pitches at different dynamic levels.

Tuning in performance

Tuning is typically done by a method called interval tuning. Timpanists who are not blessed with absolute pitch obtain a reference pitch from a tuning fork, pitch pipe , or even a note played by another instrument in the course of the performance, then use musical intervals to arrive at the desired note. For example, to tune the timpani to G and C, a timpanist may sound an A with a tuning fork, then sing (or think) a minor third above that A to tune the C, and then sing a perfect fourth below the C to tune the G. Timpanists are required to have a very well developed sense of relative pitch.

Some timpani are equipped with tuning gauges, which provide a visual indication of the drum's pitch. They are physically connected either to the counterhoop, in which case the gauge indicates how far the counterhoop is pushed down, or the pedal, in which case the gauge indicates the position of the pedal. These gauges can be useful. However, every time the drum is moved, the overall pitch of the head changes, thus the pitches must be re-marked on the gauges before every performance. Gauges are especially useful when performing music that involves blind tuning changes, or tuning changes that do not allow the player to listen to the new pitch before playing it. Good timpanists prefer to tune by ear and will only rely on gauges if absolutely necessary.

Timpanists are commonly required to tune in the middle of a piece of music, thus all timpanists must develop techniques to tune undetectably and accurately in the midst of other music.

Special tuning techniques

A glissando can be performed by changing the pitch of the drum while it can still be heard. The most effective glissandos are those from low notes to high notes and those performed during rolls. One of the first composers to call for a timpani glissando was Carl Nielsen, who used two sets of timpani, both playing glissandi at the same time, in his Symphony No. 4 ("The Inextinguishable").

Pedaling refers to playing two consecutive notes on the same drum, using the pedal to change the pitch. For example, in Samuel Barber's Medea's Meditation and Dance of Vengeance, the timpanist must play A sharp–B–C sharp–D in consecutive sixteenth notes. There is no way to place this passage across a common set of four drums, thus the timpanist must use the pedal to change the notes while playing.

Muffling

Muffling is an implicit part of playing timpani. Often, timpanists will muffle notes so they only sound for the length indicated by the composer. However, early drums did not resonate nearly as long as modern timpani, so composers often just wrote a note when the timpanist was to hit the drum without worrying about the sustain. Today, timpanists must use their ear and the score of the piece to determine the actual length the note should sound.

The typical method of muffling is to place the pads on the back of three fingers against the head while holding onto the timpani stick with the index finger. Timpanists are required to develop techniques to stop all vibration of the drumhead without making any sound from the contact of their fingers.

It should be noted that muffling is often referred to as muting, which can also refer to playing the drums with mutes on them (see below).

Special effects

Double stops and chords

It is typical for only one timpano to be struck at a time. Occasionally, composers will ask for two notes to be struck at once. This is called a double stop. Ludwig van Beethoven uses this effect in the slow movement of his ninth symphony.

Although timpanists only have two hands, it is possible to play more than two timpani at once. One way to do this is by holding two sticks in one hand much like a marimbist. Another is by adding the hands of more timpanists. Hector Berlioz achieves fully voiced chords on timpani in his Requiem ("Grande messe des morts") by employing eight timpanists, each playing a pair of timpani.

Striking the center of the drum

When the timpani are struck directly in the center of the head, the drums have a sound that is almost completely devoid of tone. George Gershwin uses this effect in An American in Paris.

Sympathetic resonance

Often, when one drum is struck, another will vibrate quietly. In orchestral playing, timpanists must actively avoid this effect (see below), but many composers have exploited this effect in solo pieces, most notably Elliot Carter in Eight Pieces for four timpani.

Mutes

Often, composers will specify that timpani be played con sordino (with mute) or coperti (covered), both of which indicate that mutes should be placed on the head. Timpani mutes are typically small, rectangular pieces of felt or leather. The degree the head is dampened can be altered by placing the mute at different spots on the head. Barber specifies that the timpani be played con sordino in a section of Medea's Meditation and Dance of Vengeance.

Mutes are also often used to dampen the sympathetic vibrations generated by external factors such as the sound produced by other instruments. These vibrations often are more apparent when the nearby sound's pitch is the same as or the dominant of that of the timpano. For instance, a trombone playing a G at forte will cause a timpano tuned to C or G to resonate by its own accord.

Unconventional beaters

Often, composers will specify that the timpani should be struck with implements other than timpani sticks. It is common in timpani etudes and solos for performers to play with their hands or fingers. Leonard Bernstein calls for maracas on timpani in both the "Jeremiah" Symphony and Symphonic Dances from West Side Story. Edward Elgar attempts to use the timpani to imitate the engine of an ocean liner in his "Enigma" Variations by requesting the timpanist play with snare drum sticks. However, snare drum sticks tend to produce too loud a sound, and since this work's premiere, the passage in question has been performed by striking the timpani with the edges of coins.

Playing the bowls

Another technique used primarily in solo work is striking the copper bowls of the timpani. Timpanists tend to be reluctant to use this effect at loud dynamic levels or with hard sticks, since copper can be dented easily.

A brief history

The origin of timpani in Europe was in the military. Since around the 13th century they have had a ceremonial function, usually being played mounted on horseback. This practice continues to this day in sections of the British Army.

Timpani made their first appearance in the orchestra in the 17th century. In music of this time they are almost always tuned to the tonic and dominant notes of the piece, a perfect fourth apart. Interestingly, timpani are often treated as a transposing instrument in the music of this period, the notes being written as C and G with the actual pitches indicated at the top of the score.

Ludwig van Beethoven (17701827) revolutionized timpani music. He not only wrote for drums tuned to intervals other than a fourth or fifth, but he gave a prominence to the instrument as an independent voice. For example, the second movement of his 9th Symphony pitches the timpanist against the rest of the orchestra with thrilling effect.

The next major innovator was Hector Berlioz (18031869). He was the first composer to indicate the exact sticks that should be used — felt-covered, wooden, etc. In several of his works he also demanded the use of several timpanists at once; "Grande messe des morts" takes 16 timpani and 10 players!

Until the 19th century, timpani were hand-tuned; that is, there was a sequence of T-shaped handles, called taps, which altered the tension in the head when turned by players. Thus, tuning was a relatively slow operation, and composers had to allow a reasonable amount of time for players to change notes if they wanted to be sure of a true note. The first pedal timpani originated in Dresden in the late 1800s and are called Dresden timpani for this reason. The pedals were turned sideways by the player's foot. However, since vellum was used for the heads of the drums, automated solutions were difficult to implement since the tension would vary unpredictably across the drum. This could be compensated for by hand-tuning, but not easily by a pedal drum. Mechanisms continued to improve in the early 20th century.

Despite these problems, composers eagerly exploited the opportunities the new mechanism had to offer. By 1915, Carl Nielsen was demanding glissandi on timpani in his 4th Symphony — impossible on the old hand-tuned drums. However, it took Béla Bartók to more fully realise the flexibility the new mechanism had to offer. Many of his timpani parts require such a range of notes that it would be unthinkable to attempt them without pedal drums.

From 1960, plastic heads have been available. These are much more reliable than the traditional vellum or calf skin, since these suffer from much variability with temperature and humidity. Plastic skins also give a greater range of pitches since they will take higher tensions. However, detractors say that the tone they produce is less rounded and certainly less authentic when playing period music. In recent years, manufacturers such as Premier Percussion have started producing heads made from traditional materials for use on modern pedal timpani in an attempt to recapture an authentic sound.

Repertoire mentioned

  • Barber – Medea's Meditation and Dance of Vengeance
  • Bartók – Violin Concerto
  • Beethoven – Symphony No. 9
  • Berlioz – Requiem ("Grande messe des morts")
  • Bernstein – Overture to Candide
  • Bernstein – Symphony No. 1 ("Jeremiah")
  • Bernstein – Symphonic Dances from West Side Story
  • Carter – Eight Pieces for four timpani
  • Elgar – Variations on an Original Theme ("Enigma")
  • Fischer – Symphony for eight timpani and orchestra
  • Gershwin – An American in Paris
  • Glass – Concerto Fantasy for two timpanists and orchestra
  • Mahler – Symphony No. 1
  • Mahler – Symphony No. 2
  • Mahler – Symphony No. 3
  • Mahler – Symphony No. 6
  • Mahler – Symphony No. 8
  • Mahler – Symphony No. 9
  • Milhaud – La création du monde
  • Nielsen – Symphony No. 4 ("The Inextinguishable")
  • Stravinsky – The Rite of Spring

External links

  • Timpani FAQ http://members.cox.net/datimp/timpani.html by Dwight Thomas, Principal Timpani, Omaha Symphony
  • Timpani picture album http://www.xs4all.nl/~marcz/TimpaniPictures.html featuring antique instruments
  • The making of a timpani stick http://www.xs4all.nl/~marcz/MakingSticks.html
  • A tribute to famous timpanists http://jetottenhof.chez.tiscali.fr/tribute.html



Last updated: 02-27-2005 18:56:35