When sound is produced in an enclosed space multiple reflections build up and blend together creating reverberation or reverb. This is most noticeable when the sound stops but the reflections continue, decreasing in amplitude, until they can no longer be heard. The time it takes for the sound pressure level of the reverberation to decay 60 decibels is known as the reverberation time, or RT(60).
Large chambers, especially such as cathedrals, gymnasiums, indoor swimming pools, large caves, etc. are examples of spaces where the reverberation can clearly be heard.
Reverberation can make it difficult to hear speech. If the reverberation from one syllable overlaps the next syllable it may make it impossible to hear. For instance, "cat", "cab", and "cap", will all sound the same.
Different types of music tend to sound best with different reverberation times during a live performance, classical music and choral music tend to require longer reverberation times than modern rock and Popular music, for example. Pauline Oliveros, Stuart Dempster, and especially their group the Deep Listening Band have performed in very reverberant spaces, such as the Fort Warden Cistern, which has a reverberation of 45 seconds.
Reverberation times are usually different at different frequencies, depending on the acoustics of the space.
Reverberation can be created artificially for both acoustical and recording purposes.
There are several different electronic mechanisms used to create a reverberation effect:
Plate reverberators use large (approx. 1 m × 2 m) metal plates, suspended with springs within damped cases to create a reverb effect. One or two transducers apply a signal to the plate by vibrating, and electronic pickups convert the vibration of the plates back into an electric signal. Reverberation time can be controlled by applying a mechanical damper to the plate.
Spring reverberators use coiled springs to reverberate a signal, given a transducer and pickup. Spring reverberators were often integrated into instrument amplifiers, and are generally considered to have the least "real" sound. An exception to this is the high-quality AKG BX-series spring reverb.
DSP reverberators use electronics and signal-processing algorithms to create the effect of reverberation, through the use of large numbers of long delays with quasi-random lengths, combined with equalization, envelope-shaping, and other processes. They may also use convolution and a pre-recorded impulse response to simulate an existing real-life space. Digital reverberators are by far the most ubiquitous.
Chamber reverberators. The most simple implementation of "artificial reverb." A large room with solid walls, such as the empty, excavated concrete foundation of a building is equipped with a loudspeaker at one end and microphones at the other. Chambers can produce long reverbs with a natural sound, but because of the space required, they are not in common use anymore. (Legend has it that the entire foundation of the Capitol Records building in Los Angeles was configured into one large echo chamber, but had to be renovated into underground parking for economic reasons.) Also, it is difficult to control the shape and character of a chamber reverb, for obvious reasons.
- Build your own plate reverb http://www.prosoundweb.com/recording/tapeop/plate/plate.php
Last updated: 02-10-2005 17:59:15
Last updated: 05-03-2005 17:50:55