The mast of a sailing ship is a tall vertical pole which supports the sails. Larger ships have several masts, with the size and configuration depending on the style of ship.
Until the 20th century, a ship's masts would be wooden spars, originally constructed from a single straight tree trunk. As ship sizes increased, taller masts were constructed by lashing up to three spars together.
A ship's masts are named from bow to stern (front to back):
-
Fore-mast - the first mast, or the mast fore of the main-mast.
- Sections: Fore-mast lower — Fore topmast — Fore topgallant mast
-
-
-
Main-mast - the tallest mast, usually located near the centre of the ship.
- Sections: Main-mast lower — Main topmast — Main topgallant mast
-
-
-
Mizzen-mast - the third mast, or the mast immediately aft of the main-mast. Typically shorter than the fore-mast.
- Sections: Mizzen-mast lower — Mizzen topmast — Mizzen topgallant mast
-
-
-
Jigger-mast - the fourth mast, although ships with four or more masts were uncommon, or the aftmost mast where it is smallest on vessels of less than four masts.
- Sections: Jigger-mast lower — Jigger topmast — Jigger topgallant mast
-
-
Mast names for other vessels generally follow this naming.
Many ships would also have bowsprit at an angle closer to the horizontal extending forward of the prow .
Most types of ship with two masts would have a main-mast and a smaller mizzen-mast, the exception being the two masted schooner which has a fore-mast and main-mast. On a two-masted vessel with the mainmast forward and a much smaller second mast, such as a ketch, or particularly a yawl, the terms mizzen and jigger are synonymous.
Some two-masted schooners have masts of identical size, but the aftmost is still referred to as the main-mast, and normally has the larger course. Schooners have been built with up to seven masts in all, with several six-masted examples.
On square rigged vessels, each mast carries several horizontal yardarms from which the individual sails are hung, see also rigging.
Modern masts
Although sailing ships had been superceded by engine powered ships in the 19th century, the design of recreational sailing ships and yachts. In the 1930s aluminium masts were introduced on large J-class yachts. Aluminium has considerable advantages over wooden masts, being lighter, stronger and impervious to rot. Also aluminium mast could be extruded as a single piece for the entire height as the mast.
After the Second World War, extruded aluminium masts became common on all dinghies and smaller yachts. Higher performance yachts would use tapered aluminium masts, constructed by removing a triangular strip of aluminium along the length of the mast and then closing and welding the gap.
From the mid 1990s racing yachts introduced the use of carbon fibre and other composite materials to construct masts with even better strength to weight ratios. Carbon fibre masts could also be constructed with more precisely engineered aerodynamic profiles.
See also
References
- http://www.bluewatersailing.com/shipclass.php
- http://www.hms-trincomalee.co.uk/virtual/rigging/sails.htm
- http://tallships.sailtraining.org/sailrigs.htm
- http://boatdesign.net/articles/mast-materials/
Last updated: 06-02-2005 04:37:48
