Online Encyclopedia Search Tool

Your Online Encyclopedia

 

Online Encylopedia and Dictionary Research Site

Online Encyclopedia Free Search Online Encyclopedia Search    Online Encyclopedia Browse    welcome to our free dictionary for your research of every kind

Online Encyclopedia



Programmable logic controller

Contents

PLC

A programmable logic controller, PLC or programmable controller is a small computer used for automation of real-world processes, such as control of machinery on factory assembly lines. Where older automated systems would use hundreds or thousands of relays and cam timers, a single PLC can be programmed as a replacement.

The PLC is a microprocessor based device with either modular or integral input/output circuitry that monitors the status of field connected "sensor" inputs and controls the attached output "actuators" (motor starters, solenoids, pilot lights/displays, speed drives, valves, etc.) according to a user-created, logic program stored in the microprocessor's battery-backed RAM memory. The functionality of the PLC has evolved over the years to include capabilities beyond typical relay control; sophisticated motion control, process control, Distributed Control System and complex networking have now been added to the PLC's list of functions.

Examples

A simple program could maintain the level of water in a tank between two float switches by opening and closing an electric valve. A slightly more complex arrangement could involve a scale under the tank (as an input) and a flow controller (as an output) allowing water to flow at a controlled rate. A typical industrial application might control several tanks in a process such as sewage treatment. Each tank might be watched for a variety of conditions such as being too full or too empty or having the wrong pH.

Analog versus digital inputs and outputs

Digital signals behave as switches, yielding simply an On or Off signal (logical 1 or 0, respectively). These are interpreted as boolean values by the PLC. Pushbuttons, limit switches, and photo-eyes are examples of devices providing a digital signal. Analog signals behave as volume controls, yielding a range of values between On and Off. These are typically interpreted as floating-point values by the PLC, with various ranges of accuracy depending on the device and the number of bits available to store the data. Pressure transducers, scales and gas leak detectors can provide analog signals.

Digital signals generally use either voltage or current, where a specific range is denominated as On (logical 1) and another as Off (logical 0). A typical PLC might use 24VDC I/O (with 24V representing On and 0V representing Off). Analog signals generally use voltage or current as well, but do not have discrete ranges for On or Off. They define a range of valid values, typically the range in which the I/O device operates reliably. Other methods of signal I/O include serial communications (typically RS-232), and proprietary networks like Allen-Bradley's Data Highway and Siemens' Profibus.

PLCs have a limited number of connections built in for signals such as digital inputs, digital outputs, analog inputs and analog outputs. Typically, expansions are available if the base model does not have sufficient I/O.

Examples

In the simple example above, the PLC is accepting two digital inputs from float switches. The PLC is controlling a single digital output to actuate the inlet valve into the tank. If both float switches are off (down) the PLC will open the valve to let more water in. It will continue to fill until both floats lift making their switches turn on. The slightly more complex example (scale and flow controller) uses analog inputs and outputs. The scale is connected to one of the PLC's analog inputs and the flow controller is connected to one of the PLC's analog outputs. In this system, we can fill at different rates based on how much water is left. If the water level drops rapidly, the flow controller can be opened wide. If water is only dripping out of the tank, the flow controller can be set to allow only a small amount of water back into the tank.

Programming

PLCs programs are generally written in a special application on a personal computer then downloaded over a custom cable to the PLC. The program is stored in the PLC either in battery-backed-up RAM or some other non-volatile memory.

Early PLCs were designed to be used by electricians who would learn PLC programming on the job. These PLC's were programmed in "ladder logic", which strongly resembles a schematic of relay logic. Modern PLCs can be programmed in a variety of ways, from ladder logic to more traditional programming languages such as Basic and C.

PID loops

PLCs may include logic for single-variable generic industrial feedback loop, a "proportional, integral, derivative" loop, or "PID controller."

A PID loop is the standard solution to many industrial process control processes that require proportional control. Proportional control dictates that large deviations should be corrected by large amounts and small deviations should be corrected by small amounts. A PID loop could be used to control the pH level of water in a swimming pool.

User interface

PLCs may need to interact with people for the purpose of configuration, alarm reporting or everyday control. A variety of methods are employed.

A simple system may use buttons and lights to interact with the user. Text displays are available as well as graphical touch screens. Most of modern PLCs can communicate over a network to some other system, such as a computer running SCADA system or web browser. Some PLCs lack a dedicated user interface and communicate with users solely via network.



Last updated: 10-24-2004 05:10:45