Manual Metal Arc welding, also known as stick or MMA welding is one of the most common forms of welding.

An electric current (either alternating current or direct current) is used to form an arc between an electrode coated in flux and the metals to be joined.

The flux gives off gases to prevent oxygen reacting with the weld metal. The flux then solidifies to form slag on top of the weld. Once cool the slag can easily be chipped off.

The polarity of the electric current affects the heat transfer to the joined pieces. Normaly the positive (+) pole is connected to the electrode. When welding very thin material or single-sided welding, the negative (-) pole of an DC source is connected to the electrode.

MMA welding takes a lot of manual dexterity in order to be able to make good welds. Flat welds are easiest, but skilled welders can do vertical or overhead welding. The most skilled welders undertake joints in high pressure pipes which require a continuous transition between the various welding techniques.

Relatively small, low-cost versions of arc welding equipment are available for the amateur hobbyist or non-expert; for instance, farmers often own this type of welder. Other forms of welding are usually out of the financial reach of the amateur.

The coated electrode used in manual metal arc welding was invented by Oscar Kjellberg.