Online Encyclopedia Search Tool

Your Online Encyclopedia

 

Online Encylopedia and Dictionary Research Site

Online Encyclopedia Free Search Online Encyclopedia Search    Online Encyclopedia Browse    welcome to our free dictionary for your research of every kind

Online Encyclopedia



Laser diode

A laser diode is a laser where the active medium is a semiconductor p-n junction similar to that found in a light-emitting diode. Laser diodes are sometimes referred to (somewhat redundantly) as injection laser diodes or by the acronyms LD or ILD.

Contents

Principle of operation

When a diode is forward biased, holes from the p-region are injected into the n-region, and electrons from the n-region are injected into the p-region. If electrons and holes are present in the same region, they may radiatively recombine —that is, the electron "falls into" the hole and emits a photon with the energy of the bandgap. This is called spontaneous emission, and is the main source of light in a light-emitting diode.

Under suitable conditions, the electron and the hole may coexist in the same area for quite some time (on the order of microseconds) before they recombine. If a photon of exactly the right frequency happens along within this time period, recombination may be stimulated by the photon. This causes another photon of the same frequency to be emitted, with exactly the same direction, polarization and phase as the first photon.

In a laser diode, the semiconductor crystal is fashioned into a shape somewhat like a piece of paper—very thin in one direction and rectangular in the other two. The top of the crystal is n-doped, and the bottom is p-doped, resulting in a large, flat p-n junction. The two ends of the crystal are cleaved so as to form perfectly smooth, parallel edges; two reflective parallel edges are called a Fabry-Perot cavity. Photons emitted in precisely the right direction will be reflected several times from each end face before they are emitted. Each time they pass through the cavity, the light is amplified by stimulated emission. Hence, if there is more amplification than loss, the diode begins to "lase".

Types of laser diode

The type of laser diode just described is called a homojunction laser diode, for reasons which should soon become clear. Unfortunately, they are extremely inefficient. They require so much power that they can only be operated in short "pulses;" otherwise the semiconductor would melt. Although historically important and easy to explain, such devices are not practical.

Double heterostructure lasers

In these devices, a layer of low bandgap material is sandwiched between two high bandgap layers. One commonly-used pair of materials is GaAs with AlGaAs. Each of the junctions between different bandgap materials is called a heterostructure, hence the name "double heterostructure laser" or DH laser. The kind of laser diode described in the first part of the article is referred to as a "homojunction" laser, for contrast with these more popular devices.

The advantage of a DH laser is that the region where free electrons and holes exist simultaneously—the "active" region—is confined to the thin middle layer. This means that many more of the electron-hole pairs can contribute to amplification—not so many are left out in the poorly amplifying periphery. In addition, light is reflected from the heterojunction; hence, the light is confined to the region where the amplification takes place.

Quantum well lasers

If the middle layer is made thin enough, it starts acting like a quantum well. This means that in the vertical direction, electron energy is quantised. The difference between quantum well energy levels can be used for the laser action instead of the bandgap. This is very useful since the wavelength of light emitted can be tuned simply by altering the thickness of the layer. The efficiency of a quantum well laser is greater than that of a bulk laser due to a tailoring of the distrubution of electrons and holes that are involved in the stimulated emission (light producing) process.

The problem with these devices is that the thin layer is simply too small to effectively confine the light. To compensate, another two layers are added on, outside the first three. These layers have a lower refractive index than the centre layers, and hence confine the light effectively. Such a design is called a separate confinement heterostructure (SCH) laser diode.

Almost all commercial laser diodes since the 1990s have been SCH quantum well diodes.

Distributed feedback lasers

Distributed feedback lasers (DFB) is the most common transmitter type in DWDM-systems.

VCSELs

VCSELs are semiconductor lasers that emit light perpendicular to the chip surface, contrary to conventional diode lasers that are edge-emitting (in-plane) devices.

See also Laser diode rate equations, Collimator




Last updated: 02-08-2005 15:05:26
Last updated: 02-26-2005 04:59:47