Online Encyclopedia Search Tool

Your Online Encyclopedia

 

Online Encylopedia and Dictionary Research Site

Online Encyclopedia Free Search Online Encyclopedia Search    Online Encyclopedia Browse    welcome to our free dictionary for your research of every kind

Online Encyclopedia



Gatling gun

Gatling gun illustrated in an 1885 encyclopedia in Swedish http://www.lysator.liu.se/runeberg/nfai/0122.htm
Enlarge
Gatling gun illustrated in an 1885 encyclopedia in Swedish http://www.lysator.liu.se/runeberg/nfai/0122.htm

The Gatling gun was the first successful machine gun. Unlike previous devices it was the first to combine reliability, high firing rate and ease of loading into a single device. It was designed by the American inventor Richard J. Gatling in 1861 and patented on May 9, 1865.


The design took advantage of the new brass bullet cartridge that had replaced the paper cartridge. The gun was a hand-driven rotary device, powered using a crank. A cylinder of ten barrels would be loaded and fired for each revolution. The loading was a simple gravity feed from a magazine mounted on top of the weapon. The maximum rate of fire was a possible 1,200 rounds per minute, although 400 was more reasonable. The gun was produced in calibres ranging from one inch down to 0.45 inch. It was operated by a crew of four.

The barrels, a carrier, and a lock cylinder were separate and all mounted on a solid plate revolving around a central shaft, mounted on an oblong fixed frame. The carrier was grooved and the lock cylinder was drilled with holes corresponding to the barrels. Each barrel had a single lock, working in the lock cylinder on a line with the barrel. The lock cylinder was encased and joined to the frame. The casing was partitioned, through this opening the barrel shaft was journaled. In front of the casing was a cam with spiral surfaces. The cam imparted a reciprocating motion to the locks when the gun rotated. Also in the casing was a cocking ring with projections to cock and fire the gun.


Turning the crank rotated the shaft. Cartridges, held in a hopper, dropped individually into the grooves of the carrier. The lock was simultaneously forced by the cam to move forward and load the cartridge and when the cam was at its highest point the cocking ring freed the lock and fired the cartridge. After the cartridge was fired the continuing action of the cam drew back the lock bringing with it the spent cartridge which was then dropped to the ground.

Gatling gun photo
Enlarge
Gatling gun photo

The grouped barrel concept was not new, it had been tried since the 18th century, but poor engineering and the lack of a metal cartridge made the attempts unsuccessful. The innovative features of the Gatling gun were its independent firing mechanism for each barrel and the simultaneous action of the locks, barrels, carrier and breech.

The smallest calibre gun also had a Broadwell drum feed in place of the curved magazine of the other guns. The cartridge holder was divided into sixteen sections each holding 25 cartridges. As each section was emptied the drum rotated bringing a new section into use until all 400 rounds had been fired.

The concept was made obsolete with the development of the gas or recoil blowback concept, which is the basis of modern machine guns.

The GAU-8 Gatling gun of an A-10 Thunderbolt II at Osan Air Base, Korea
Enlarge
The GAU-8 Gatling gun of an A-10 Thunderbolt II at Osan Air Base, Korea

However, Gatling-style guns with rotating barrels were to return as very high rate-of-fire weapons in military aircraft and ship-based anti-missile defence system s. They now commonly use electric motors, rather than cranks, for rotation. One example is the M61 Vulcan 20mm cannon, the most commonly used member of a family of weapons designed by General Electric. The Vulcan is a six-barrelled electric Gatling capable of firing more than 6,000 rounds per minute, a rate unachievable with a conventional machine gun. A variety of similar weapons are available in calibers ranging from 5.56mm to 30mm, the rate of fire being somewhat proportional to the size and mass of the ammunition (which also determines the size and mass of the barrels).

See also




Last updated: 02-07-2005 06:54:37
Last updated: 02-17-2005 08:10:09