Ferromagnetism is a phenomenon by which a material can exhibit a spontaneous magnetization, and is one of the strongest forms of magnetism. It is responsible for most of the magnetic behavior encountered in everyday life, and is the basis for all permanent magnets (as well as the metals that are noticeably attracted to them).
There are a number of crystalline materials that exhibit ferromagnetism. We list a representative selection of them here (Kittel, p. 449), along with their Curie temperatures, the temperature above which they cease to be ferromagnetic (see below).
One can also make amorphous (non-crystalline) ferromagnetic metallic alloys by very rapid quenching (cooling) of a liquid alloy. These have the advantage that their properties are nearly isotropic (not aligned along a crystal axis); this results in low coercivity, low hysteresis loss, high permeability, and high electrical resistivity. A typical such material is a transition metal-metalloid alloy, made from about 80% transition metal (usually Fe, Co, or Ni) and a metalloid component (B, C, Si, P, or Al) that lowers the melting point.
One example of such an amorphous alloy is Fe80B20 (Metglas 2605) which has a Curie temperature of 647 K and a room-temperature (300 K) saturation magnetization of 125.7 milliteslas (1257 gauss), compared with 1043 K and 170.7 mT (1707 gauss) for pure iron from above. The melting point, or more precisely the glass transition temperature, is only 714 K for the alloy versus 1811 K for pure iron.
The spin of an electron has a magnetic dipole moment and creates a magnetic field. (The classical analogue of quantum-mechanical spin is a spinning ball of charge, but the quantum version has distinct differences, such as the fact that it has discrete up/down states that are not described by a vector.) In many materials (specifically those with a filled electron shell), however, the electrons come in pairs of opposite spin, which cancel one another's dipole moments. Only atoms with unpaired electrons (partially filled shells) can experience a net magnetic moment from spin. A ferromagnetic material has many such electrons, and if they are aligned they create a measurable macroscopic field.
The spins/dipoles tend to align in parallel to an external magnetic field, an effect called paramagnetism. (A similar effect due to the orbital motion of the electrons, which effectively forms a microscopic current loop that also has a magnetic dipole moment, is called diamagnetism.) Ferromagnetism involves an additional phenomenon, however: the spins tend to align spontaneously, without any applied field. This is a purely quantum-mechanical effect.
According to classical electromagnetism, two nearby magnetic dipoles will tend to align in opposite directions (which would create an antiferromagnetic material). In a ferromagnet, however, they tend to align in the same direction because of the Pauli principle: two electrons with the same spin cannot lie at the same position, and thus feel an effective additional repulsion that lowers their electrostatic energy. This difference in energy is called the exchange energy and induces nearby electrons to align.
At long distances (after many thousands of ions), the exchange energy advantage is overtaken by the classical tendency of dipoles to anti-align. This is why, in an equilibriated (non-magnetized) ferromagnetic material, the spins in the whole material are not aligned. Rather, they organize into domains that are aligned (magnetized) at short range, but at long range adjacent domains are anti-aligned. The transition between two domains, where the magnetization flips, is called a Bloch wall, and is a gradual transition on the atomic scale (covering a distance of about 300 ions for iron).
Thus, an ordinary piece of iron generally has little or no net magnetic moment. However, if it is placed in a strong enough external magnetic field, the domains will re-orient in parallel with that field, and will remain re-oriented when the field is turned off, thus creating a "permanent" magnet. This magnetization as a function of the external field is described by a hysteresis curve. Although this state of aligned domains is not a minimal-energy configuration, it is extremely stable and has been observed to persist for millions of years in seafloor magnetite aligned by the Earth's magnetic field (whose poles can thereby be seen to flip at long intervals). The net magnetization can be destroyed by heating and then cooling (annealing) the material without an external field, however.
As the temperature increases, thermal oscillation, or entropy, competes with the ferromagnetic tendency for spins to align. When the temperature rises beyond a certain point, called the Curie temperature, there is a second-order phase transition and the system can no longer maintain a spontaneous magnetization, although it still responds paramagnetically to an external field. Below that temperature, there is a spontaneous symmetry breaking and random domains form (in the absence of an external field). The Curie temperature itself is a critical point, where the magnetic susceptibility is theoretically infinite and, although there is no net magnetization, domain-like spin correlations fluctuate at all lengthscales.
The study of ferromagnetic phase transitions, especially via the simplified Ising spin model, had an important impact on the development of statistical physics. There, it was first clearly shown that mean field theory approaches failed to predict the correct behavior at the critical point (which was found to fall under a universality class that includes many other systems, such as liquid-gas transitions), and had to be replaced by renormalization group theory.
In 2004, it was discovered that a certain allotrope of carbon, nanofoam , exhibited ferromagnetism. The effect dissipates after a few hours at room temperature, but lasts longer at cold temperatures. The material is also a semiconductor. It is thought that other similarly formed materials, of boron and nitrogen, may also be ferromagnetic.
- Charles Kittel, Introduction to Solid State Physics (Wiley: New York, 1996).
- John David Jackson, Classical Electrodynamics (Wiley: New York, 1999).
- E. P. Wohlfarth, ed., Ferromagnetic Materials (North-Holland, 1980).